Huawei OptiXstar V183 Quick Start Manual page 12

Huawei OptiXstar V183
Quick Start
Issue 01 (2023-04-28)
NO TE
1. If the Master FTTR is not powered on or the power switch of the Master FTTR is turned
off, all indicators are in the Off state.
2. What can I do if the indicator status is abnormal?
a. Check whether the corresponding optical, network, POTS, or USB port is properly
connected.
One end of the fiber connector is located at the rear of a Master FTTR, and the other
end is located on the wall or in the weak-current box.
Note: Do not look into an optical port with naked eyes.
b. If the WLAN indicator is abnormal, press the WLAN/WPS button on the Master FTTR
to enable the WLAN function.
c. Restart the Master FTTR.
Press the On/Off button to turn off the Master FTTR. After a few seconds, turn on the
Master FTTR.
d. If the fault persists, contact the operator's service hotline and turn to the installation
and maintenance personnel for help.
Copyright © Huawei Technologies Co., Ltd.
4 Indicator Description
9