Pioneer KEH-P7400 Service Manual page 39

| CcxX-631
1.2 LOADING AND EJECT OPERATIONS
@ Loading the Cassette Tape
1.Push the cassette tape by finger.
2.The draw-in lever is pushed by the cassette tape. And the load switch is turned on by way of the draw-
in arm and of the load switch arm.
3.The sub-motor starts running.
4.The mode gear turns in direction (1).
5.The put-down driving lever moves in direction (2).
6.Move the put-down lever operation shaft in direction (3) and turn the draw-in arm in direction (4).
7,.The cassette tape is loaded.
Put-down lever
Put-down driving lever E
Mode gear
Put-down lift cam
Lift Position a Put-down lever operation shaft
Mo
Draw-in arm
Put-down
Position
Put-down driving lever Put-down lever
Put-down lever Fig.2