Advertisement
KEH-P7400,P7450
3. TEST MODE
3.1 TEST MODE
Test mode is mainly used adjustment of IP BUS type CD
. Canceling test mode
multi players.(Such as CDX-P610}
Switch the back up and ACC off.
- Switching to test mode
"+ SINGLE/10TRK/32TRK wilt continue to operate even
While pressing the 4, 6 keys together, switch the back
after the key is released. Tracking closed the moment
up and ACC ON,
oY
C-MOVE is released.
* JUMP MODE resets to SINGLE as soon as power is
switched off.
@ Flow Chart
*—-_ ACC,Back-up ON
<Regulator
OFF>
CD PLAYER SELECT
SOURCE
During regulator off,press the 12
Not sdlustment for
key anc the system wil! be put into
T.OFFS
the new test mode.
<Regulator ON>
Display,
BAND
Regulator ON
Adjustment for
T.OFFSET
<Close oe)
Soon Etna
«Close tracking > Carriage shifted
Carriage shifted
outwards
while
inwards
while
visotay| 91 9092 |
this key is pressed. this key is pressed.
<Close tracking >
' <Clase spindie>
Carriage shifted
© Carriage shifted
Tracking
Display
Mette)
{Rough)
outwards while
inwards white
balance
example
0 { Ge Sh
this key is pressed.
this key is pressed.
adjustment
Carriage move
Carriage move
or T, jump
|
.
AGC display*2
AGC
Tracking open
select
.
.
Single
—> 47RK
—-10TRK
C.MOVE <— 100TRK < 32TRK
Tracking open
{in the case of continuous
jumping)
. SELECT T.JUMP MODE
'Normal focus close 00(99}—-> $ curve check 01> Focus EQ check 02
5
*2 pNormal display > Focus gain
—> Track gain 73
*3 100 TRK jump & carriage move — Tracking Close in a iittle while the keys are released.
*4
SINGLE/4/10/32 —> continuous even after key releasé.
*5 rhcancel — T.offset —> T.bai —» Rough Servo 7
Advertisement
