White spots on the screen, sound hissing.
—
Check that aerial is plugged in correctly.
-—
Check
other
programmes
as _ transmitter
may not be operating.
—
Check that channel is stored in programme
memory.
Press
@)
key and, when scanner has stop-
ped, press memory key >M
.
Weak picture and/or sound.
—
Check that aerial is plugged in correctly.
No colour or weak colour.
—
Check colour saturation adjustment and
fine tuning.
No sound
—
Check volume control adjustment
~—
Disconnect headphones
Remote control inoperative.
—
Check
that the receiver is not in the text
mode. Press the TV-key.
—
Check handset battery.
Note: In case there are colour inconsistencies
in the picture, switch the receiver off with the
mains switch
for at least 10 minutes
before
switching it on again.
— 45 —
—
Ist das Antennenkabel
richtig angeschlos-
sen?
Ist auf dem
eingesteliten
Kanal
eine Sen-
dung?
Wahlen
Sie
einen
anderen
Pro-
grammplatz.
Sind die Abstimmwerte des Fernsehkanals
gespeichert?
Dricken
Sie die Suchlaufta-
ste @
und die Speichertaste -M_
sobald
der Suchlauf anhalt.
Bild und/oder Ton rauscht
Kontrollieren
Sie bitte den
Anschluss
der
Antenne.
Keine oder nur wenig Farbe
—
Kontrollieren
Sie
die
Farbsattigungsein-
stellung und die Feinabstimmung.
Kein Ton
—
Steht eventuell der Lautstarkeregler auf Mi-
nimum?
—
Ist ein Kopfhérer angeschlossen?
Die Fernbedienung arbeitet nicht.
—
Kontrollieren Sie, ob der Empfanger auf Vi-
deotextempfang
geschaltet
ist.
Drucken
Sie die Taste TV.
Kontrollieren
Sie die Batterie
der Fernbe-
dienung.
Hinweis!
Sollten
Farbfehlier
auftreten,
dann
schalten Sie den Empfanger fiir 10 Min. aus.