Table of Contents
Advertisement
Trouble Shooting & Notice
10.
I.
If you require mute function, please press Mute button on Display
II.
Under paired status, if the Display flash quickly with beep sound, it
means the bad detection signal or the signal is interfered.
Please adjust the display to a higher position and away from metal part.
III.
Under paired status, if the Display keeps quick flash continuously with
sound, it means the Sensor might be missing. Please check and clean all
pairing status and then the Display can back to normal situation.
Please contact the nearest distributor to solve this issue.
It is the driver's responsibility to maintain safe reverse parking skills, such as slowing
down, use of rear and side mirrors are always essential.
Please remove water, snow or mud on the sensors in time.
13
Advertisement
Table of Contents
