Download Print this page

Toshiba SD-23VB Service Manual page 14

Dvd video player & video cassette recorder

Advertisement

Connections
Tips
Depending on your TV and other equipment you wish
to connect, there are various ways you could connect
the unit.
Please refer to the manuals of your TV, Stereo
System or other devices as necessary to make the
best connections.
For better sound reproduction, connect this unit's
AUDIO OUT jacks to the audio in jacks of your
amplifier, receiver, stereo or audio/video equipment.
See "Connecting to optional equipment" on page 11.
Caution
– Make sure this unit is connected directly to the TV.
Set the TV to the correct video input channel.
– Do not connect this unit's AUDIO OUT jack to the
phono in jack (record deck) of your audio system.
Connecting to a TV
Make one of the following connections, depending on
the capabilities of your existing equipment.
When using the SCART's RGB signal, set the video
output switch to RGB. When using the
COMPONENT VIDEO OUT jacks, set the video
output switch to COMPONENT.
Basic connection (AV)
1 1
Connect the EURO AV1 AUDIO/VIDEO on the rear
panel of this unit to the SCART input socket on the
TV using a SCART lead.
2 2
Some TV broadcasters transmit encoded television
signals which you can only see with a purchased or
rented decoder. You can caonnet such a decoder
(descrambler) to this unit.
Basic connection (RF)
1 1
Connect the RF antenna cable from your indoor/
outdoor antenna to AERIAL jack on the rear panel
of this unit.
2 2
Connect the supplied RF antenna cable from the
RF OUT jack on the rear panel of this unit to your
television's Antenna Input.
S-Video connection
1 1
Connect the S-VIDEO OUT jack on this unit to the
S-Video in jack on the TV using the optional
S-Video cable.
2 2
Connect the Left and Right DVD/VCR AUDIO OUT
jacks of this unit to the audio left/right in jacks on
the TV using the audio cables.
Component Video (Color Stream
(DVD EXCLUSIVE OUT)
1 1
Connect the COMPONENT VIDEO OUT/
(DVD EXCLUSIVE OUT) jacks on the DVD+VCR
Player to the corresponding in jacks on the TV
using an Y Pb Pr cable.
2 2
Connect the Left and Right AUDIO OUT (DVD
EXCLUSIVE OUT) jacks of the DVD+VCR Player
to the audio left/right in jacks on the TV using the
audio cables.
Rear of this unit (Component Video connection)
Rear of TV
AERIAL
SCART INPUT
Satellite or Set Top Box
Rear of this unit (Basic connection)
1-12
®
) connection
R
r
P
b
COMPONENT VIDEO INPUT
AUDIO INPUT
Pr
Pb
Y
L
R
S-VIDEO OUT

Advertisement

loading

This manual is also suitable for:

Sd-23veSd-23vl