To Record On An Audio Tape - Sony STR-AV880 Service Manual

STR-AV880
TO RECORD ON AN AUDIO TAPE
RECORDING
Tape deck
= Snr
ee AE
- onodad oor T4446
"| ) ©O® 00 00 ater
1 Turn on the receiver, tape deck and desired program
source.
2 It the MONITOR indicator lights, press this key to
disengage it.
3 Select the desired program source with the FUNCTION
key.
For an FM or AM program, tune in the desired station.
4 start the program source and set the tape deck in
recording mode.
The volume and tone settings on the receiver do not have
any effect on the recording.
{ TAPE'1 or TAPE 2 REC OUT *
AUDIO TAPE DUBBING ©
To dub a tape, connect a tape deck for playback to the TAPE
1 IN jacks and a tape deck for eceraingns to the TAPE 2 REC
OUT jacks. fe
Tape deck 2
3.5 2.5
1 Turn on the receiver and connected tape decks.
2 Insert a recorded tape into tape deck 1.
3 Insert a blank tape into tape deck 2 and adjust the
recording level.
4 Press the TAPE 1 (TAPE 1 — 2) key.
5 start playback on tape deck 1 and recording on tape deck
2. Dubbing will begin.
Monitoring of a 3-head tape deck
if you have connected a tape deck having separate record
and playback heads to the TAPE 2 TAPE IN jacks, you can
monitor the recording results while recording or dubbing.
Press the MONITOR key. The MONITOR indicator will light
and the recorded program will be heard.
Press the MONITOR key again to listen to the source sound.