ASROCK W480M WS User Manual page 12

Hardware Monitor
Temperature
Fan
Voltage
Support OS
OS
Environment
Temperature
Humidity
This motherboard supports Wake from on Board LAN. To use this function, please make
sure that the "Wake on Magic Packet from power off state" is enabled in Device Manager
> Intel® Ethernet Connection > Power Management. And the "PCI Devices Power On" is
enabled in UEFI SETUP UTILITY > Advanced > ACPI Configuration. After that, onboard
LAN1&2 can wake up S5 under OS.
If you install Intel® LAN utility or Marvell SATA utility, this motherboard may fail Win-
dows® Hardware Quality Lab (WHQL) certification tests. If you install the drivers only, it
will pass the WHQL tests.
4
CPU, MB Card Side sensing
Fan Tachometer
CPU Quiet Fan (Allow Chassis Fan Speed Auto-Adjust by
CPU Temperature)
Multi-Speed Control
+12V, +5V, +3.3V, CPU Vcore, DRAM, V1.0M,+BAT, 3VSB,
5VSB
Microsoft® Windows®
- Windows 10 (64 bit)
Linux®
- RedHat Enterprise Linux Server 7.7 (64 bit) / 8.1 (64 bit)
- CentOs 7.7 (64 bit) / 8.1 (64 bit)
- SUSE Enterprise Linux Server 12 SP5 (64 bit) / 15 SP1
(64 bit)
- Ubuntu 19.04 (64 bit) / 20.04 (64 bit)
Virtual
- VMWare® ESXi 7.0.0/ vSphere 7.0.0
* Supports UEFI BOOT only.
* The Intel Raid mode is NOT supported on the Linux system.
*Please refer to our website for the latest OS support list.
Operation temperature: 10°C ~ 35°C / Non operation
temperature: -40°C ~ 70°C
Non operation humidity: 20% ~ 90% (Non condensing)