Table of Contents
Advertisement
1. ABOUT LEAD FREE SOLDER (PbF)
Distinction of PbF PCB:
PCBs (manufactured) using lead free solder will have a PbF stamp on the PCB.
Caution :
- Pb free solder has a higher melting point than standard solder;
Typically the melting point is 50 - 70°F (30 - 40°C) higher. Please
use a soldering iron with temperature control and adjust it to 700 ±
20°F (370 ± 10°C). In case of using high temperature soldering iron,
please be careful not to heat too long.
- Pb free solder will tend to splash when heated too high (about
1100°F/600°C)
- This lead free solder will be used for the products after serial No.
1,000,001.
2. FEATUERS
- Miniature 8-disc CD Auto Changer.
- A CD-R and a CD-RW that hold CD-DA data can be reproduced.
- With ACC OFF, Eject Function.
- The CD changer can be mounted at any of the following 5 angles: 0°
22.5° 45° 67.5° 90°
3. REPLACING THE FUSE
Use fuses of the same specified rating (3amps). Using different substitutes or fuses with higher
ratings, or connecting the product directly without a fuse, could cause fire or damage to the
stereo unit.
4. MAINTENANCE
Your product is designed and manufactured to ensure a minimum of maintenance. Use a dry, a
soft cloth for routine exterior cleaning. Never use benzine, thinner or other solvents.
5. NOTES
[CD DECK BLOCK]
This model has no servo alignment points because microcomputer controls the servo circuit.
6. LASER PRODUCTS
3
Advertisement
Table of Contents
