Henny Penny Frontier UHC 600 Quick Reference Card

Download this manual

Frontier UHC 600 Operation Quick Reference Card

Summary

Use the following instructions to operate and maintain the UHC 600 holding cabinet. If you have questions or

issues with your holding cabinet, contact support by calling 1-937-456-8406.

Table of Contents

1. Menu

2. Operation of Timers

3. Checking Shelf Temperatures

4. Switching Menu Modes

5. Clean mode

1. Menu

Home

Selection Menu

Clean Mode

Language Selection

Shelf Temperature

2. Operation of Timers

a) Preheating Mode: In this mode the shelfs are currently preheating and are not operational to hold

product.

Page 1 of 4

Operation

Information

Page 1 Operation Information Frontier UHC 600 Operation Quick Reference Card Summary Use the following instructions to operate and maintain the UHC 600 holding cabinet. If you have questions or issues with your holding cabinet, contact support by calling 1-937-456-8406. Table of Contents 1.
Page 2 Operation Information b) Product Selection: Once Preheat has finished and the product is ready to use, it displays grey. To select a product to start the timer, click once on the product you want to start, it turns green and starts counting down.
Page 3 Operation Information Reduce timer: If you want to reduce a timer, tap a product once to start the holding process, tap it again before the timer starts. Each tap reduces the timer in 5-minute increments. Once you get to the time you desire, stop tapping, the status turns green or grey depending on if another timer is already started.
Page 4 Operation Information 3. Switching Menu Modes To switch to a different menu option, click the selection menu lines on the main menu bar to access the mode switch option. You can then swipe to change each slot to a certain daypart or all slots at once by selecting the switching mode on the left menu.