BMW X1 Owner's Manual page 263

If despite driving with the headlights switched on,
increasing humidity forms, for instance water
droplets in the light, have the headlights
checked.
Headlight setting
The headlight adjustments can be affected by
changing lights and bulbs. After the headlight ad‐
justment was changed, have it checked and, if
necessary, corrected by a dealer's service center
or another qualified service center or repair shop.
Front lights, bulb replacement
Halogen headlights
Overview
1 High beams, headlight flasher
2 Low beams
3 Side marker lights
4 Turn signal
5 Parking lights / daytime running lights
6 Parking lights / daytime running lights
Parking lights, daytime running lights
The parking lights and daytime running lights are
made using LED technology.
In the case of a malfunction, contact a dealer's
service center or another qualified service center
or repair shop.
Replacing components
Online Edition for Part no. 01402631131 - X/19
Accessing the turn signals, low beams,
high beams/headlight flasher
Follow the safety information, refer to page 262.
Open the hood, refer to page 251.
Turn signal
Bulb A2357
1. Access to the turn signal on the right side:
unhook and fold away the filler neck for the
wiper fluid with the screwdriver from the on‐
board vehicle tool kit.
2. Turn the bulb socket counterclockwise and
remove.
3. Press the bulb gently into the socket, turn
counterclockwise and remove.
4. Install the new bulb and bulb holder in reverse
order of removal.
Low beams
55 watt bulb, H7LL.
1. Access to the low beams on the right side:
unhook and fold away the filler neck for the
MOBILITY
263