BMW X1 Owner's Manual page 203

NOTE
This device has been tested for human exposure
limits and found compliant at a minimum dis‐
tance of 4 in/10 cm during operation.
Therefore, a distance of 4 in/10 cm must be
maintained in every direction when operating the
device.
Mounting position of the product.
Safety information
Warning
When charging a device that meets the Qi
standard in the wireless charging tray, any
metal objects located between the device and
the tray can become very hot. Placing storage
devices or electronic cards, such as chip cards,
cards with magnetic strips or cards for signal
transmission, between the device and the tray
may impair the card function. There is a risk of
injury and risk of damage to property. When
charging mobile devices, make sure there are
no objects between the device and the tray.
NOTICE
The tray is intended for mobile phones up to a
particular size. Forceful inserting of the mobile
phone into the tray can damage the tray or the
mobile phone. There is a risk of damage to
property. Observe the maximum dimensions for
mobile phones. Do not force the mobile phone
into the tray.
Online Edition for Part no. 01402631131 - X/19
Interior equipment
Functional requirements
▷ The mobile phone must compatibly support
the required Qi standard.
If the mobile phone does not support the Qi
standard, the mobile phone can be charged
using a special Qi-compatible charging case.
▷ The ignition is switched on.
▷ Observe the maximum dimensions of the
mobile phone.
▷ Use only protective jackets and covers up to
a maximum thickness of 0.07 in/2 mm. Oth‐
erwise, the charging function may be im‐
paired.
▷ The mobile phone to be charged is located in
the center of the tray.
Operation
Overview
1 Front holder with LED
2 Storage area
3 Movable clamp
Inserting the mobile phone
The mobile phone must not exceed the maxi‐
mum size of approximately 5.9 x 3.07 x
0.62 in/150 x 78 x 16 mm.
1. Open the center armrest.
2. Push back the clamp.
CONTROLS
203