BMW X1 Owner's Manual page 130

CONTROLS
Resetting average values
Press and hold the button on the turn signal
lever.
The average consumption since delivery from
the factory cannot be reset.
Engine temperature display
Concept
Depending on the vehicle equipment, the current
engine temperature is displayed, based on a
combination of the coolant temperature and en‐
gine oil temperature. As soon as the optimum
operating temperature has been attained, the in‐
dicator is in the center position.
General information
If the engine oil or coolant, and thus the engine,
become too hot, a Check Control message is
displayed too.
To check the coolant level, refer to page 257.
Display
130
Displays
Online Edition for Part no. 01402631131 - X/19
Distance to destination
Depending on the vehicle equipment, the dis‐
tance remaining to the destination is displayed if
a destination is entered in the navigation system
before the trip is started.
The distance to the destination is adopted auto‐
matically.
Time of arrival
Depending on the vehicle equip‐
ment, the estimated time of arrival
is displayed if a destination is en‐
tered in the navigation system be‐
fore the trip is started.
The time must be correctly set.
Onboard Computer on the
Control Display
Concept
The Onboard Computer displays different vehi‐
cle data on the Control Display, such as average
values.
General information
Two types of Onboard Computers are available
on the Control Display:
▷ "Onboard info": average values, such as the
consumption, are displayed. The values can
be reset individually.
▷ "Trip computer": the values deliver an over‐
view of a specific route and can be reset as
often as necessary.
Calling up the Onboard Computer or
trip computer
Via iDrive:
1. "My Vehicle"
2. "Driving information"
3. "Onboard info" or "Trip computer"