Advertisement
Front Wheel Chock Assembly
1. The 1500ELE comes standard with a wheel chock for easy loading.
2. The wheel chock is assembled by first bolting the cradle plate to the front
extension panel or the table itself.
3. Next, bolt the upright stop plate to the cradle plate.
4. Lastly, pin the rocking cradle to the cradle plate and adjust to fit your tire using
the removeable pin.
5. If you have purchased the optional wheel vise, you will need to drill holes to
mount it to the lift.
6. The moving side of the vise is attached to the left side of the main body of the lift.
7. The fixed side of the vise mounts right of center of the lift.
8. The vise operates by rotating the handle to adjust the width of the vise to lightly
squeeze the motorcycle tire.
9. It is MANDATORY that tie downs are used to secure the motorcycle when on
the lift whether it is in the wheel chock or vise.
10. Install 2 eye bolts
a. With the front extension installed the eye bolts are secured using the
predrilled holes in the front center of the side extensions with the provided
hardware.
b. Without the front extension the eye bolts are secured using the predrilled
holes in front corners of the main body of the lift with provided hardware.
Standard Wheel Chock
Optional Wheel Vise
Advertisement
