Table of Contents
Advertisement
Check type
Check code
6. Check the operation of the dispenser.
Dry is not
None
satisfied.
1. Check the connections for the Sub PBA connector
2. Check the LED and Input Key
LED or Input
None
Key Fail
3. Check the DC voltage of the Main PBA.
Checking method
� If rinse aids are not dispensed, a dry error may occur.
� Because the dishes are heated and heat dried during the last drying cycle,
the dried state of plastic dishes may not be optimal.
1) Push 'Hi-Temp Wash' + 'Sanitize' + 'Power Key'
� Normal : All LED display
2) Push 'Normal'~'Sanitize' � Normal : Each LED on
3) Every time you enter 'Delay Start'
� Normal : Wash LED → Rinse LED → Dry LED `
→ Control Lock LED → Delay Start LED
→ Segment Dot → Rinse aid Refill LED
4) Push 'Start' � Normal : LED Display '1234'
5) Push 'Auto' � Normal : Version Display
Corrective actions
- See "Detergent is not dispensed"
- Reconnect the Sub PBA connectors..
- Faulty : Replace the Sub PBA.
- See "Main PBA DC voltage error".
Troubleshooting_51
Hide quick links:
Advertisement
Table of Contents
