Part
Filter Mesh
Assy Sump-
body
Upper parts
&
Cover Sump
&
Impeller
Filter Mesh body
&
Case scroll
&
Disposer
Cover Sump
22 _ Disassembly and Reassembly
Figure
Preparation:
• Remove the baskets, nozzles, duct-main
1. Release the 13 screws on Assy sump.
2. Pull out the Assy cover sump slightly and
3. Remove the screw (1) that is fixing the
Description
- Refer the each disassembly section to
separate.
(Except the two (2) screws holding the
holder nozzle in the center of the sump.)
Take off the filter mesh body, cover sump
(& holder nozzle L).
hold and rotate the duct nozzle and Assy
case sump together.
impeller and circulation motor shaft.
Caution
Use gloves for your hand to hold the
impeller during removing the screw.
Be careful, the impeller can injure
your hands if gloves are not worn.