Samsung DW80K5050US Service Manual page 46

Related
Item Symptoms
Parts
N5: Setting Dry
Increase Option by
Default
44 _ Troubleshooting
1) If Dry+ (or Sanitize) option is set to On by default, it indicates as "d1".
2) If Dry+ (or Sanitize) option is not set to On by default, it indicates as "d0".
1. To set Dry+ (Sanitize) option to On by default, use the Dry+ (Sanitize) option button to switch it On/Off [n5: Setting Dry
Increase Option by Default mode only].
- When Dry+ (Sanitize) button is pressed, Dry+ (Sanitize) is set to On or Off by default.
※ For models without Dry+, the Sanitize button can be used to set the Sanitize option to On by default.
[note] About This Option
This option is designed to increase the drying performance by default in case there are consumer complaints.
- If Dry+ (Sanitize) option can be set to On by default, it powers on and sets the Dry+ (Sanitize) option to On by default.
- If the course does not support Dry+ (Sanitize) option setting, it is not set to On by default.
- Even if the course is completed without using Dry+ (Sanitize) option, the last used course is set to On by the course
save feature on its next power-on and Dry+ (Sanitize) option is set automatically depending on the default setting as
long as Dry+ (Sanitize) option is set to On by default.
- Even if Dry+ (Sanitize) option is automatically set by the default setting, it can be switched On/Off by pressing Dry+ (Sanitize) Key.
Description