Advertisement
TROUBLESHOOTING
Tuner
-——
Symptom
——
Cause
+
Remedy
No reception.
¢ Antenna not connected.
*® Wrong radio band.
© Station not tuned in.
© Input selector not set to TUNER.
Sree
ese
re
eat noise heard.
¢ TV is on.
¢ Loop antenna position bad.
© Connect antenna correctly.
© Set to desired radio band.
© Tune in station.
© Set to TUNER.
¢ Turn off TV or move TV away.
¢ Change loop antenna position.
Noise heard.
© Interference from nearby fluorescent light, hair
dryer, or other electrical appliance.
© Not tuned in correctly.
© Stop using device causing interference.
e Use tuner controls to tune in station.
No FM reception.
¢ Antenna not connected.
© Wrong radio band.
¢ Connect antenna correctly.
¢ Set to desired radio band.
Sound is distorted.
¢ Antenna in poor position.
¢ Broadcast is weak.
¢ Interference from other electrical devices or
multi
eption.
ultipath receptio
© Change antenna position.
¢ Use external antenna.
© Change antenna position.
Remote Control Unit
=—
Clock and Timer
Remote control does not work.
© Batteries are dead or no batteries in remote
control unit.
© Poor angle or too great a distance from the
remote sensor window.
© There is an obstacle between you and the
remote sensor window.
¢ For CD player, the remote control cord is not
connected.
° A fluorescent light is shining on the remote
sensor window.
¢ Insert new batteries.
¢ Use within seven meters and within a 30 degree
angle of the remote sensor window.
¢ Change your position or move the obstacle.
* Correctly connect remote control cord.
¢ Turn off the light.
No time indication.
¢ There was a power blackout.
¢ AC plug was pulled.
© Set time again.
¢ Set time again.
Timer does not work.
¢ Current time is not set.
© Start and/or stop time is not set.
© Timer is not on.
¢ Set current time.
¢ Set ON and OFF times.
* To use timer, press the timer selector switch so
that the timer display lights.
Turntable
Platter does not turn.
© Belt is off.
No sound.
Noise or scratchy sounds.
© Input selector not set to PHONO.
© Put belt correctly on platter.
|
¢ Set to PHONO.
* Dust on record.
* Scratch on record.
© Clean record.
e Use good record.
Abnormal functioning of this unit may be caused by lightning, static
electricity, or other external interference. To restore normal operation,
turn the power off and then on again, or unplug the AC power cord
and then plug it in again.
26
<ARB1218>
Advertisement
