Advertisement
PANEL FACILITIES
Remote control unit
@) POWER key
@) Function keys
Sets function to DAT/VIDEO.
Sesivadea Sets function to PHONO.
Sets function to CD DIRECT.
(@ TUNER STATION key
switches.
oP shuvevhvaevssawesacts Stations change in order in the upward direction
Ps inetivie eines Stations change in order in the downward direction.
© GRAPHIC EQUALIZER operation keys
ON/OFF:
Turns the equalizer on and off.
CALL:
Recalls
the
preset
equalization
curves
(PRESET)
and
memorized equalization curves (MEMORY) in sequence.
© VOLUME
+ (UP)/- (DOWN) key
When pressed, VOLUME on the amplifier is actually moved by a motor.
@ SURROUND key
Turns SURROUND & STEREO WIDE on and off.
() CD operation keys
Perform the connections so that the CD player is operated by the remote
control unit.
CO cseeendieheansereersty Play
DISC........sccccvoneoes DISC selection
ED uastaewnendebedeevers Stop
DO eects Rettitets Pause
Ke,
Pf.
Track search
NOTE:
Note that the DISC selector key on the remote control unit may not
operate, depending on the CD player used.
Timer operation keys
SLEEP:
Sets the sleep timer. Each time you press this key, the
setting changes as shown
here. The current setting is
shown on the tuner display.
Power turns off when your set time has elapsed.
90 ——-_—~
60 —————>
30
(Approx.
(Approx.
(Approx.
90 minutes)
60 minutes)
30 minutes)
00
(OFF)
If you press the SLEEP key during SLEEP operation, the
display will show the time remaining till power turns off.
14
<ARB1218>
WAKE-UP: Timer playback setting/cancellation can be performed when
the timer playback time has been set. This is shown in the
tuner display section.
SNOOZE:
Turns off power if pressed after timer playback begins.
Timer playback begins again approx. 5 minutes later.
The amplifier input selector automatically switches to the music source
being operated when you press the CD playback (>), cassette tape
deck playback { <1, >), or tuner station controls.
NOTE:
/t is not possible to operate the CD player with the remote control unless
the remote control cord is connected (refer to page 2).
Range of remote control (See page 8)
When
the remote control unit is pointed at the remote sensor
window on the tuner and any of its keys is pressed, the tuner and
other components can be operated by remote control.
Distance: Within a range of approx. 7 meters from the remote sensor
window on the tuner.
Angle: Within approx. 30 degrees from the center of the remote
sensor window on the tuner.
Remote control will not be possible if there is an obstacle between
the remote control unit itself and the remote sensor window on the
tuner.
Performance of the remote control unit is adversely affected in the
presence of strong fluorescent light. Keep such lights away, specially
from the sensor window.
Advertisement
