Table of Contents
Advertisement
Playback Procedures
1. Set the Power Switch to ON, then the
Level Meters will illuminate.
5. Set the EQ to the suitable position
according to the cassette tape in use.
6. When you playback a tape recorded
with Dolby NR In, please set Dolby
NR
Switch to IN.
2. Depress the Stop/Eject Button all the
way down to open the Cassette Lid.
fwd = | pause
iQi@
3. Place a cassette in the Cassette
7. Push the Play Button.
Compartment.
juperHead
cep Peary
eS
te
be
Z
8. Adjust the output volume to obtain
suitable volume.
LINTON
LS
=~
ox
4, Depress the Lid till the cassette is
securely placed.
9. When you pushed the Pause Button, the
tape will stop temporarily, and when you
again push, the running will be commenced.
10. The tape will stop when the STOP
Button is pushed, and the cassette
in
the compartment will be ejected when
further depressed.
11. At the tape end, tape run will
automatically stop and the button will
be released.
12. Insert the Stereo Headphones into
the Headphone Jack, you now Can listen
to your own recording. Volume can be
adjusted by the output volume.
Advertisement
Table of Contents
