Connections - Nakamichi 500 Operating Instructions Manual

Connections
9 © ©
(9) 0}
Connecting the Line Output: Connecting the Line Input: Connecting the DIN Connector
Connect to the Tape Monitor of your Connect to the Tape Rec Jacks of your Socket:
Stereo Amp or AUX Jacks from the Stereo Amp from the Input Jacks If your Stereo Amp is equipped with a
Output Jacks through pin cords. through pin cords. DIN Connector Socket, connect with a
DIN cord. In this case, please do not use
pin cords simultaneously.
PD Mifeetirie
Microphones and Headphone Please use the microphones having Please use the headphone having
As shown in the above Fig., both of the impedance of 600 ohm. impedance of 8 ohm.
right and left Stereo Microphones and Insert the Stereo Headphones into the
the Blend Microphone can be connected. Phone Jack as shown in the above Fig.
4