Table of Contents
Advertisement
Configuration parameter list
Here are the configuration parameters and their functions.
[NOISE RATIO]
(Total Noise Ratio + Band Noise Ratio)
Specify the amount of attenuation that is used to remove the
noise (i.e., when the gate is closed). When the Auto function
is used, the "Suppress Depth" parameter (p.24) will be set so
as to maintain the S/N ratio (the proportion of signal to noise)
that you specify here.
(Total Noise Ratio) (0 - 100 dB, ~)
HC-APAUTO
TOTAL
H.Ratio=
LaBde
(Band Noise Ratio) (-30 - +30 dB)
1FaHz
ME
Hi-Ar Auto
H, Rabio=
B: this difference is set as the Suppress Depth
[THRESHOLD MARGIN]
(Total Threshold Margin + Band Threshold Margin)
TOTAL
a, BE
HC-At AUTO
Threshrgrn=
LPSHz
A, BE
Hic-Ai AUTO
Thrshr-ani=
OdB-+}
- - - =~ -
ee re
7 Re SO.
eM
A: this level is set as the Threshold
B: detected noise level
[DETECTING TIME]
(0.1 — 10.0 sec)
* There are no band parameters for this setting.
AUTO
Seas
Time=
1, 8560
Noise canceling
29
Advertisement
Table of Contents
