Control Panel Settings Summary - Turtle Beach Ear Force AK-R8 User Manual

Audio Advantage SRM

Control Panel Settings Summary

This section summarizes the state of major control panel settings:
Stereo to Multi-Speaker: Indicates that a stereo source
will be routed to all of the speakers because the Speaker
Configuration is set to either 4, 5.1 or 7.1 speaker mode.
This allows the stereo source to play in surround sound.
To listen to a stereo source with two speakers when using
4, 5.1 or 7.1 speakers, set the Speaker Configuration to 2
Speaker.
Multi-channel to Sub: Indicates that the speaker
channels are being routed to the sub-woofer output. This
mode is set by clicking the Speaker Options button in the
Speakers Tab.
Master Equalization: Indicates that the Master Graphics
Equalizer is enabled, therefore the system frequency response may be modified from its
"flat" setting by the Equalizer.
Speaker Equalization: Indicates that the Speakers Equalizer is enabled, therefore the
individual speaker frequency response may be modified from its "flat" setting by the
Equalizer.
Speaker Position: Indicates that the speaker positions in the Speaker Position section
of the Effects Tab have been moved. If you find that the sound is not emanating from
the speaker being tested, and this LED is on, check the Speaker Position settings to see
if the speaker signal has been panned to a different location.
Environments: Indicates that the Environments in the Effects Tab are enabled, which
adds a reverberation or "concert hall" effect to the sound.
Key Shifter: Indicates that the Pitch Shifter in the Effects Tab is enabled, therefore the
digital audio output may be being altered by this effect.
Center Canceller: Indicates that the Center Canceller effect in the Effects Tab is
enabled, which removes audio signals that are panned to the center of a stereo source.
This is typically used to remove the voice from a song.
Page 39