Care, Cleaning & Maintenance; Recommended Accessories - Maxxus UNIVERSAL-TRAINING BENCH PRO Installation Manual

Cleaning:
Clean the training device each time after training with a damp cloth to remove any sweat and or liquids. Do not
use solvents. Dry o the cleaned areas thoroughly. Regular cleaning helps to keep your device in good condi-
tion and thereore also signicantly contributes to the length o its service lie.
The costs of repairing a training device which has not been properly maintained will not be covered in any
way by the warranty. Also clean the traction cables regularly.
Cleaning and Lubricating the Chrome Guide Pipes
The barbell bar guide pipes must also be cleaned and lubricated regularly to guarantee optimum smooth
running. To achieve this clean the guide pipes with a damp cloth and some liquid soap or washing up liquid.
Alternatively, you can use the MAXXUS® degreaser spray (optionally available). Ater this, dry the guide pipes
o thoroughly and lubricate them with MAXXUS® lubricant spray (optionally available) leaving a thin lm on the
surface. With regular use you should lubricate the guide pipes once a month. If squeaking noises occur during
training the pipes require lubricating immediately. MAXXUS® degreaser and lubricating sprays are available
from our Online Shop at www.maxxus.com.
Maintenance
Checking the Fixing Materials
You must check to see if the screws, nuts are tightened securely at least once a month and if necessary, tighten
them.
This device is recyclable. At the end of its service life you must dispose of it properly. Do not dispose the device
in the normal household rubbish.
Dispose the device at a communal waste disposal facility or at a registered waste disposal company.
Observe current regulations which apply accordingly. I in doubt seek advice rom your local government ofce
or county council as to where you can dispose of the device properly and in an environmentally sound manner.
These accessories are best suited for use with your training device. All products are available from
our online shop at www.maxxus.com.
MAXXUS® Floor Protection Mats
Due to its extreme density and material thickness of 0.5 cm and 1.2 cm, these mats provide per-
ect protection or oors and oor coverings against damaging, scratches and soiling through body
sweat. Noise caused by running and movement is signicantly reduced.
Available in the following sizes:
− 160 x 90 cm – thickness 0.5 cm
− 210 x 100 cm – thickness 0.5 cm
− 100 x 100 cm - thickness 1.2 cm
MAXXUS® Degreaser Spray - Optimum cleaner or cleaning o dirt and maintaining the guide
pipes and roller surfaces.
MAXXUS® Lubricating Spray – Optimum lubrication for guide pipes.
MAXXUS® Anti-Static Spray – Eective against the static charges created in rames, clothing and
training computers. Devices which are located on carpets or synthetic oors will become statically
charged. MAXXUS ® Anti-Static Spray will deter this.
Synthetic suraces treated with MAXXUS® Anti-Static Spray do not attract dust as quickly and will
remain clean for longer.
MAXXUS® Special Foam Cleaner – Use for regular cleaning of your training device. Plastic covers
and metal rames can be easily cleaned and perectly maintained with MAXXUS ® Special Foam
Cleaner. It is also suitable for cleaning pulse belts and other training accessories.
Care, Cleaning & Maintenance
Disposal

Recommended Accessories

12