Advertisement
Quick Links
User servicing manual
1. You can check where to buy replacement parts at http://samsung.com/support
2. Visit the part purchase site and enter the model code of your product to check the parts
available for purchase. The model code is labelled on the outer side of your product.
- You can check the model code and version on the barcode label at the bottom left of
the product.
3. For replacement parts, make sure the part name matches that of the illustration in this
manual.
- User-serviceable parts are limited to handles (some models only), gaskets, drawers, and
hinges.
NOTE
Following the repair by a non-authorised service provider, self-repair or non-professional
repair of the product, Samsung is not liable for any damage to the product, any injury or
any other product safety issue caused by any attempt to repair the product which does
not carefully follow these repair and maintenance instructions. Any damage to the product
caused by an attempt to repair the product by any person other than a Samsung certified
service provider will not be covered by the warranty.
CAUTION
•
The part name listed on the site may differ from that in this manual. Please make sure
you choose the right part name.
•
Replacing hinges requires extreme caution because it involves detaching the door.
•
Be sure to wear safety gloves while making repairs.
RB7300T_User-servicing-manual_EN.indd 1
English
10/15/2020 3:39:13 PM
Advertisement
Related Manuals for Samsung RS50N3513SA
Summary of Contents for Samsung RS50N3513SA
- Page 1 Following the repair by a non-authorised service provider, self-repair or non-professional repair of the product, Samsung is not liable for any damage to the product, any injury or any other product safety issue caused by any attempt to repair the product which does not carefully follow these repair and maintenance instructions.
- Page 2 The actual image and provided parts of the refrigerator may differ, depending on the model and the country. 01 Handle 02 Drawer 03 Top hinge 04 Gasket 05 Bottom hinge English RB7300T_User-servicing-manual_EN.indd 2 10/15/2020 3:39:14 PM...
-
Page 3: Handle Replacement
Handle replacement Model name looks like this: RS54**3****, RS52**3****, RS50**3****,What replaces the asterisks may differ depending the model. Asterisk(s) in the model code indicate a variant model and may replace (0-9) or (A-Z) in the model code. CAUTION • When replacing the door handle, take care not to scratch the front of the door. •... - Page 4 3.Unscrew 4 screws to diassemble Cap support handle and Support handle. 4.Pull the Support handle out using hex wrench as shown or flat-head driver pushing the back side.
-
Page 5: Gasket Replacement
Gasket replacement CAUTION Make sure you firmly attach the gasket. Otherwise, cold air from the refrigerator may leak. To remove the gasket 1.Pull the 4 corners of gasket. Pull the corne of Gasket 2.Pull the center of gasket. To replace the gasket 1.Push the 4 corners of gasket. - Page 6 Drawer replacement CAUTION Check that the drawer is inserted properly into the rail during assembly. To remove the drawer 1. Pull out the drawer as far as it goes. 2. Tilt the drawer up and pull it out until it is removed.
-
Page 7: Reversing The Door
Reversing the door NOTE For the models with handles, reverse the handles first. (For detailed information, see the “Reversing the door handle position (For models with bar handles)” section.) 1. Disconnect the power cord, andremove 1 cover screws using a Phillips screwdriver. Then open the Freezer door and pull the hooks on the sides to loosen the cover. - Page 8 1. Disconnect the Power Cord. 2. Lay down the set. Must working more than 2 people. CAUTION Be sure to unplug the power cord before performing the operation above. Hinge l Hinge lo o w w CAUTION Hinge l Hinge lo o w w 1.