Basic Play; Resume Function - Panasonic DVD-XP50 Operating Instructions Manual

Basic play
CnH EEH EZHS]
E233 [cd] [wm aj f_MP3j
EQ33 EQ3EI
Press the numbered buttons to select an item.
To select a 2-digit number
e g. 23: [§10} - [2} - [3]
•When playing DVDs, you can also use [A, ▼, ►) to select items.
Press [ENTER} to confirm your selection.'
Play of the selected item now begins.
Other buttons used to operate menus
Read the disc's instructions for further details about operation.
[►»],[►►/►»]: Shows the next menu.
[W^], [(^^/◄◄]: Shows the previous menu.
[RETURN]: Shows the menu screen. MftUl
(TOP MENU]: Shows the first menu screen, nrjigii i»vi»b's
[MENU]: Shows the menu screen.
When television
[B esu m elf u ricti on]
nrm
rrogf iron ktoi icdi rwMAifMPsi
(When the elapsed play time is displayed)
The position you stopped play at is recorded by the unit when is
flashing on the display.
While is flashing, press [►] (PLAY) to start
play from where you stopped it. (When playing
DVD-Video •* Chapter Preview below)
•The position is cleared when the disc tray is
opened or the unit is switched to standby.
To clear the position
Press (■] before recalling the memorized position.
Preparation
Turn on the television and select the appropriate video input on the
television to suit the connections for the player.
Press [(!)] to turn on the unit.
For progressive output ■» page 9, Enjoying progressive video
Press [^] to open the disc tray.
Place the disc on the disc tray.
• Remove TYPE 2 and 4 discs from their cartridges before use. i;m.m
• Label-up (With double-sided discs, load
so the label for the side you want to play
is facing up.)
Press [►] (PLAY).
The disc tray closes and play begins.
|WMA|[MP3]
Group and track names are displayed on the television. Press
[SUBTITLE] to turn the display on or off.
To stop play
Press [H] (~ right, Resume function).
To pause play
Press [II].
Press [►] (PLAY) to restart play.
•If "0" appears on the television
The operation is prohibited by the unit or disc.
• Discs continue to rotate while menus are displayed even after playing an
item. Press [■] when you finish to preserve the unit's motor and your
television screen.
• Volume may be lower when playing DVDs than when playing other discs
or during television broadcasts. Reduce the volume before playing other
cm sources so that a sudden increase in output does not occur.
o
IT
[ Position Memory function_
This function allows you to memorize a position to start from even after
switching the unit to standby or changing discs. You can memorize
positions on up to five different discs at a time. When you memorize
another position, the earliest position is replaced.
•This function does not work while playing some DVDs or play lists on
DVD-RAM. :
1. During play, press [POSITION MEMORY],
I Position memorized —O
-O
OOOl
II T 1
Light as you memorize positions.
2. Press [(])] to switch the unit to standby, or press [A] to remove the
disc.
3. When you are ready to play the disc again, press [►] (PLAY).
Play starts from the memorized position and the position is cleared.
(When playing DVD-Video • Chapter Preview below)
To clear the position
Press [■] before recalling the memorized position.
j Chapter Preview
The following message appears immediately after you press [►] (PLAY).
Press [►] (PLAY) while the message is
displayed and the beginning portions of
each chapter up lo the current one are
played. Full play resumes from the point
where you pressed (■) or (POSITION MEMORY].
(This feature works only within a title.)
If you do not press [►] (PLAY), the message disappears and play starts
from where you pressed [■] or [POSITION MEMORY].
Press PLAY to Preview Chapters