Table of Contents
Advertisement
mmuMBi
Other operations
Controlling the repeat function with the re¬
mote control
See page 18.
Changing sound quality with the remote
control
See page 22.
(if i® HP)
(Beep... Beep)
(if-if)
(Beep...Bee...p)
(Bp — h^— )
(If-lf-)
Preparation:
Set the switch to [MAIN],
To start play E
Press once during off or stop mode.
To stop play 0
Press once during play.
To turn off the units
Press and hold during play or stop mode.
Skip forward/backward 0
Press during play.
+ : Forward direction
Backward direction
Rapid forward/backward 0
Press and hold during play.
To adjust the volume Q
When adjusting the volume using the remote control,
po¬
sition the volume control on the unit to between 4
and 6.
fBeen Ronn
.1 .. I-
(Becp Beep)
Basic operation
■ Before using the remote control 0
The function of the remote control depends on the posi¬
tion of the switch
© When switched to [MAIN]:
Basic operation can be performed.
© When switched to [SUB]:
The repeat function can be controlled.
Sound quality can be changed.
© When switched to [HOLD]:
The hold function is on. (Release hold function be¬
fore use.)
■ Operation confirmation tones
This tone sounds when a button on the remote control is
pressed. Refer to the parentheses in the illustration for
the different types of confirmation tones.
Advertisement
Table of Contents
