Dekala ACA-002-B - Sunrise Alarm Clock Manual

WHAT'S INCLUDED

GET STARTED

1. Remove the Insulation Film from the Button Cell Compartment at the bottom.
   
2. Connect the Sunrise Alarm Clock to power with the USB Cable and Adapter provided.
   
3. Loosen the tie that wraps the FM Radio Antenna, then unroll the wire for receiving strong signals when turning on the FM Radio.
   

This product has no power on/off button, and it will be on once you plug the power adapter into the socket.
To disconnect power, unplug the power adapter.

PRODUCT OVERVIEW

OPERATION GUIDE

Note:
The Sunrise Alarm Clock will automatically save the current setting and exit from setting mode if the operation is not resumed within 15s.

Watch Instruction Video

Time Setting

1. Press and hold the Setting/ button for 2 seconds until the hour starts flashing
   
2. Press to change the Hour, then press Setting/ to confirm and switch to adjust "Minute".
   
3. Press to change the Minute, then press Setting/ to confirm and start to set the Time Format.
   
4. Press to select Time Format 24-hour clock or 12-hour clock, then press Setting/ to confirm and complete the setting.
   

Tip:
lf the 12-hour time format is selected, PM or AM will be displayed accordingly.

Adjust the Brightness of Time Display

Press Setting/ to toggle the brightness of the LED Display among Day Mode, Night Mode and OFF.

Day Mode indicates that the brightness level of the LED display will remain consistently bright, even during nighttime.

Night Mode indicates the brightness level of the LED Display will always be the lowest.

OFF means turning off the LED display.

Alarms Setting

You could set Alarm 1 and Alarm 2 with the wake-up light.
We will take setting Alarm 1 as an example to guide you how to set an alarm.

Watch Instruction Video

1. Press and hold Alarm 1/ for 2 seconds until the icon and the Hour start flashing on the LED display.
   
2. Press to change the Hour, then press Alarm 1/ to confirm and switch to adjust "Minute".
   
3. Press to change the Minute, then press Alarm 1/ to confirm and start the Ringtone Setting.
   
4. Press to select your favorite ringtone for Alarm 1, then press Alarm 1/ to confirm and start the Volume Setting.
   

Tip:
S-00: Ringtone off
S-01 to S-07: Nature sounds
F-08: The last FM station you were tuned to before turning off the radio.
lf you prefer another station, please turnon the FM radio to search and select the one you like, then set the alarm again.

5. Press to adjust the ringtone volume, then press Alarm 1/ to confirm and start the Sunrise Light Setting.
   

Tip:
U-01 to U-16: Volume levels

6. Press to adjust the brightness level for the light, Once done, press Alarm 1/ to confirm your selection and start setting the sunrise time that is the lighting time before the alarm ringing.
   

Tip:
L-00: Light off
L-01 to L-20: Brightness levels
lf you select L-00, there will be no sunrise light (but only ringtone) when Alarm 1 rings.

7. Press to select the sunrise time from 10, 20, 30, 40, 50 and 60 MIN, then press Alarm 1/ to confirm and complete all the settings for Alarm 1. Alarm 1 is on after setup.
   

Tip:
If you set the duration to 10 minutes and the alarm time to 7:00 AM, the light will turn on at 6:50 AM and slowly increase in brightness. By the time the alarm goes off at 7:00 AM, the light will be at the brightness level you selected in Step 6.

Note:

• When the alarm is ringing, press the button to close the alarm
• If you don't need to use the alarm function on the weekend, you can identify it by icon , whether the alarm clock is turned on. The screen shows the icon which means that the alarm function is turned on. On the contrary, it means that the alarm function is turned off.

Snooze

Watch Instruction Video

When the alarm rings, press Snooze/ to activate Snooze Mode to delay the alarm for 9 minutes.

Note:

1. You can snooze up to 5 times.
2. Press the corresponding Alarm Button / to manually stop the alarm.
3. If you don't respond to it within 15 minutes after the alarm rings, the alarm will automatically stop for this time.

FM Radio

1. Press and hold the FM Radio/ button down for 2 seconds, the clock will scan all the available staions automatically and save them as P-01/P-02 and so on(up to 20 channels). You can simply wait until the process is complete without needing to take any further action.
   
2. After finishing, the clock radio will select P01channel by default.

1. Press FM Radio/ to turn on/off FM radio.
   
2. Press and hold to select other the channel you are interested in.
   
3. Press to adjust the volume.
   

Tip:
U-01 to U-16: Volume levels

Note: To improve your reception, please completely extend the antenna and adjust its position until you achieve the strongest signal.

Falling-asleep Mode

Watch Instruction Video

Falling-asleep mode simulates the natural process of a sunset to help you easily drift off to sleep. Once enabled, the light will gradually dim to simulate the setting sun, while the volume of your chosen nature sounds will decrease over time.

1. Press the Fall-asleep/ button for 2 seconds to enter the fall-asleep mode. Press the button to adjust the Timer(up to 120minutes). And then press the fall-asleep button to confirm it.
   
2. Press button to adjust the brightness. And then press the Fall-asleep/ button to confirm it.
   

Tip:
L-00: Light off
L-01 to L-20: Brightness levels

3. Press button to adjust the sound. You can choose pre-set natural sounds or FM radio as fall-asleep sound. And then press the Fall-asleep/ button to confirm it.
   

Tip:
S-00: Sound off
S-01 to S-03: Nature sounds
F-04: The last FM station you were tuned to before turning off the radio.
lf you prefer another station, please turn on the FM radio to search and select the one you like, then set it again.

4. Press button to adjust the volume.
   
5. Press Fall-asleep/ to confirm your selection and complete all the setting for Sleep Aid. Sleep Aid is enabled after setup.
   

Tip:
Press to turn on/off Sleep Aid mode.

Colorful Light Setting

Watch Instruction Video

Manual Color Light Mode

1. Press Light/ to enter the manual color light mode.
   
2. Press to adjust the brightness level.
   

Auto Color Light Mode

Double press Light/ to enter the auto color light mode, which means the color of the light will change automatically.

Short press to choose one solid color (7 colors are available), which means it will stay the same color until you press the button again.

Short press Light/ again to turn off the Colorful Light .

SPECIFICATIONS

CAUTIONS

• Please use the product correctly according to the instructions. Disassembling and collision are strictly prohibited.
• Please place the product on a stable, horizontal, and non-smooth surface.
• Do not use it in high temperature, humidity and corrosive environment to avoid electric leakage due to circuit damage.
• Please keep it in a proper place and out of reach of children to avoid accidents.
• This product is not fireproof, do not throw it into the fire, and do not place it close to any fire source.
• This product is not waterproof, do not put it into the water to avoid damage.

STORAGE

• Please wipe the product with a soft cloth.
• Do not scrub the product with abrasive cleaner, rough chemical, alcohol or acetone detergent to avoid damage to the surface of the product.
• Store the product in a safe, dry place where it will not be crushed, bruised or damaged.
• Do not wrap the power cord around the appliance during storage.

Instruction Videos

Feel free to contact us if you need further assistance, our troubleshooting team will get back to you ASAP.
Support@dekalastore.com
Official Website: www.dekalastore.com
Email: info@dekalastore.com

Documents / Resources

References

• Dekala Sunrise Alarm Clock, Light Alarm Clock, Friendship Lamp – Dekala Store

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Dekala ACA-002-B - Sunrise Alarm Clock Manual