Instruction Videos Support@dekalastore.com If you need any assistance please feel free to contact us CONTENT What’ s Included Get Started Product Overview Operation Guide Specifications Cautions Storage...
WHAT'S INCLUDED Sunrise Alarm Clock USB Cable Adapter User Manual GET STARTED 1. Remove the Insulation Film from the 2. Connect the Sunrise Alarm Clock to power Button Cell Compartment at the bottom. with the USB Cable and Adapter provided. Important: This product has no power on/off...
3. Loosen the tie that wraps the FM Radio Antenna, then unroll the wire for receiving strong signals when turning on the FM Radio. PRODUCT OVERVIEW Snooze Volume + LED Light FM Radio Down Volume - Alarm 1 Sleep Aid Alarm 2 Time Setup LED Display Mode...
Page 6
Speaker USB Output Micro USB Input FM Antenna Button Cell Compartment...
OPERATION GUIDE Note: The Sunrise Alarm Clock will automatically save the current setting and exit from setting mode if the operation is not resumed within 15s. Watch Instruction Video Time Setting Setting Step 1: Press and hold the Setting/ button for 2 seconds until the hour starts flashing Setting Step 2:...
Page 8
Step 4: Setting Press to select Time Format 24-hour clock or 12-hour clock, then press to confirm and complete the setting. Setting/ Tip: lf the 12-hour time format is selected, PM or AM will be displayed accordingly. Adjust the Brightness of Time Display Press Setting/ to toggle the brightness of the LED Display among Day Mode, Night Mode and OFF.
Page 9
Setting OFF means turning off the LED display. Alarms Setting Watch Instruction Video You could set Alarm 1 and Alarm 2 with the wake-up light. We will take setting Alarm 1 as an example to guide you how to set an alarm. Alarm 1 Step 1: Press and hold Alarm 1/...
Page 10
Alarm 1 Step 3: Press to change the Minute, then press Alarm 1/ to confirm and start the Ringtone Setting. Step 4: Press to select your favorite ringtone for Alarm 1 Alarm 1, then press Alarm 1/ to confirm and start the Volume Setting.
Page 11
Step 6: Press to adjust the brightness level for the light, Once done, press Alarm 1/ to confirm Alarm 1 your selection and start setting the sunrise time that is the lighting time before the alarm ringing. Tip: L-00: Light off L-01 to L-20: Brightness levels lf you select L-00, there will be no sunrise light (but only ringtone) when Alarm 1 rings.
Page 12
Snooze Snooze When the alarm rings, press Snooze/ to activate Snooze Mode to delay the alarm for 9 minutes. Watch Instruction Video Note: 1. You can snooze up to 5 times. 2. Press the corresponding Alarm Button to manually stop the alarm. 3.
Page 13
Long Press Step 2: Press and hold to select other the channel you are interested in. Short Press Step 3: Press to adjust the volume. Tip: U-01 to U-16: Volume levels Note: To improve your reception, please completely extend the antenna and adjust its position until you achieve the strongest signal.
Page 14
Step 2: Press button to adjust the brightness. And then press the Fall-asleep/ button to confirm it. Sleep-aid Tip: L-00: Light off L-01 to L-20: Brightness levels Step 3: Press button to adjust the sound. You can Sleep-aid choose pre-set natural sounds or FM radio as fall-asleep sound.
Page 15
Sleep-aid Step 5: Press Fall-asleep/ to confirm your selection and complete all the setting for Sleep Aid. Sleep Aid is enabled after setup. Tip: Press to turn on/off Sleep Aid mode. Colorful Light Setting Watch Instruction Video Manual Color Light Mode Light Step 1: Step 2:...
Page 16
Auto Color Light Mode Light Double press to enter the auto Light/ color light mode,which means the color of the light will change automatically. Short press to choose one solid color (7 colors are available), which means it will stay the same color until you press the button again.
SPECIFICATIONS Model ACA-002-B Size 168×165×84.6mm Weight 320g Material ABS、PC、Electronic components FM radio frequency 87.5-108MHz Control mode Button control Adaptor 5V-2A/100-240V Certification CAUTIONS Please use the product correctly according to the instructions. Disassembling and collision are strictly prohibited. Please place the product on a stable, horizontal, and non-smooth surface.
Do not use it in high temperature, humidity and corrosive environment to avoid electric leakage due to circuit damage. Please keep it in a proper place and out of reach of children to avoid accidents. This product is not fireproof, do not throw it into the fire, and do not place it close to any fire source.
Need help?
Do you have a question about the ACA-002-B and is the answer not in the manual?
Questions and answers