Table of Contents
Advertisement
Troubleshooting
Check the following points before returning the unit for service
Trouble _
"Possible | Cause
Solution
Turn on the
AC adaptor is n
is not plugged —
Plug in the AC adaptor
players POWER
| into the outlet or DC IN jack | correctly ( 13 P 11)
switch, but
correctly
ee Panera
The batteries are not
Install the batteries into player
on the
display
installed into player
properly or replace with new
correctly, or dead
ones (0s P 11)
The data of
| Connection between the
Connect Sound/CD-ROM
CD-ROM is not
player and the computer ıs
| Interface Card and |/F Box to
transmitted to
improper
the player and to the computer
your computer
properly ( Us
(tar P _12)
There are duplicate SCSI
ID numbers in computer
system
The software is not
installed correctly
The interface cable of pin is
bent or broken
Terminator of the player ts
set to OFF when using the
player with the I/F Box
attached
The Speakers POWER
switch is turned off
No sound can be
listened or Power
correctly, or dead
Headphones/Speakers are
not connected
Volume control of player or
I/F Box are set to "0"
Set different SCSI ID
number for each device in your
system ( tar P _38)
Install the software correctly
(US P 16)
Contact an Authorized
Panasonic Service Center
Set the terminator of the player
to ON (ta P 33)
Turn on the Speaker's POWER
switch
Install the batteries into
R-speaker properly or replace
with new ones ( PP
13)
Connect the headphones to the
players PHONES jack firmty or
connect the speaker to the I/F Box's
PHONES Jack ( sap P 13, 27)
Set the volume control to a
higher level
L-speaker Is not connected
to R-speaker
Volume ıs set to the lowest
level or Mute ts selected in
the Volume Control/Mixer
application
Connect L-speaker to
R-speaker properly ( tF P 13)
Set the volume to a higher level
or turn off the Mute in the
Volume Control/Mixer
application ( tarP
19, 20 in the
Audio Applications Manual)
31
[a
6unro
/ 9114
JNOV3
+
Advertisement
Table of Contents
