Table of Contents
Advertisement
CRS-2104
2. DISASSEMBLY
2.1
REMOVING THE CASSETTE COMPARTMENT LID
2.3 REMOVING THE CHASSIS
While pressing the point A and B in the arrow direction,
1. Remove the five knobs A through E.
pull the lid toward as shown. The lid will be removed.
. Remove the five screws 1 through 5.
. The top escutcheon (F) will be removed.
. Remove
the two
condenser
microphones
(G) from
the front
side by opening the stoppers toward
the
arrow direction.
. Then the chassis will be removed.
NOTE:
The
knobs
of the
FUNCTION,
MODE,
and
AFC
switches
should
be
replaced
after
putting
the inside
white kips on the switch schafts.
2.2
REMOVING THE BACK COVER
1. Open the battery compartment
cover by depressing
2. Disconnect
the antenna
lead connector
A, and the
the finger grip and pulling down.
Remove the seven
back cover will come off the casing.
screws 1 through 7.
Advertisement
Table of Contents
