CT-L1400
7.2.
AP-BOARD
1. Remove the rear cover.
2. Remove the screws (5 pcs) and the screws (2 pcs) and
detach the shield plate.
3. Disengage the shaft holder hook and detach the power
button shaft.
4. Remove the screw (1 pcs) and disconnect the couplers (B2
(AP2) and B3 (AP3)) between B-Board and the AP-Board.
5. Disconnect the couplers (AP4, AP5, AP6, AP7 and AP8)
the flexible cable (AP1 and AP9) and remove the screws (3
pcs) and detach the AP-Board.
Caution:
PCB Fixing screws driving torque: 0.2-0.3 N·m (2-3kg·mm)
Do not tighten screws so hard.
10