6.4.
Power unit
1. Disconnect the couplers (P1 and P2).
2. Remove the fixing screws (5pcs
3. Remove the power unit.
6.5.
A-Board
1. Remove the fixing screws (4pcs
2. Disconnect the couplers (A2 and A5).
3. Disconnect the bridge connector (A3 and A4).
4. Remove the A-Board and the shield case.
6.6.
).
6.7.
).
9
AP-Board
1. Disconnect the couplers (AP1, AP2 and AP5).
2. Disconnect the bridge connector (A3 and A4 on A-Board).
3. Remove the AP-Board.
K-Board
1. Remove the fixing screws (2pcs
2. Remove the K-Board unit.
3. Disconnect the couplers (K1, K2 and K3).
4. Remove the K-Board.
TX-23LX50M / TX-23LX50A / TX-23LX50X
and 2pcs
).