Table of Contents
Advertisement
SAFETY
7.
Ventilation - The appliance should be situated so that its location or position does
not interfere with its proper ventilation. For example, the appliance should not
be situated on a bed, sofa, rug, or similar surface that may block the ventilation
openings, or placed in a built-in installation, such as a bookcase or cabinet that
may impede the flow of air through the ventilation openings. Place the unit in a
well-ventilated location, leaving at least 2 inches (5 cm) of clearance on all sides,
top and rear of unit for air flow. If ventilation is blocked, the unit may overheat and
malfunction.
8. Heat - The appliance should be situated away from heat sources such as radiators,
heat registers, stoves, or other appliances (including AVA-Series) that produce
heat.9. Grounding or Polarization - Precaution should be taken so that the grounding
or
polarization means of an appliance is not defeated.
10. Power Cord Protection - Power supply cords should be routed so that they are not
likely to be walked on or pinched by items placed upon or against them, paying
particular attention to cords at plugs, receptacles, and the point where they exit
from the appliance.
11. Power Sources - The appliance should be connected to a power supply only of the
type described in the operating instructions or as marked on the appliance.
12. Main Power Disconnect - The main power plug is used as the disconnect device
and shall remain readily operable. When installing the product, ensure that the
plug is easily accessible.
13. Non-Use Periods - The power cord of the appliance should be unplugged from the
outlet when left unused for a long period of time.
14. Attachments - Only use attachments/accessories specified by the manufacturer.
15. Location of the Mini-AVR - Do not mount this unit under a kitchen cabinet. Do not
expose the mini-AVR to direct sunlight or heating units as the mini-AVR internal
components' temperature may rise and shorten the life of the components.
16. Avoid damp and dusty places.
17. Object and Liquid Entry - Care should be taken so that objects do not fall and
liquids are not spilled into the enclosure through the openings.
18. Servicing - The user should not attempt to service the appliance beyond that
described in the operating instructions. All other servicing should be referred to
qualified service personnel.
19. Damage Requiring Service - The appliance should be serviced by qualified service
personnel when: A. The power supply cord or the plug has been damaged; B.
Objects have fallen, liquid has been spilled into the appliance; C. The appliance
has been exposed to rain; or D. The appliance does not appear to operate
normally; or E. The appliance has been dropped or the enclosure is damaged.
14
AVA-Series Amplifiers
Advertisement
Table of Contents
