Page 2
Wallmount Instructions The UPSWM is shipped in its collapsible position and includes two mounting braces. Open the mounting bracket, hold the bracket level against the intended mounting surface and mark the locations of the mounting holes . Drill 1/8” guide holes in these locations. Place the included washers around the included screws, then drive the screws through the mounting holes and into the guide holes.
Page 3
Instrucciones de Montaje en la Pared: El UPSWM es embarcado plegada e incluye dos tirantes de montaje. Abra la repisa y sosténgala nivelada contra la superficie en donde quiera montarla marque la ubicación de las perforaciones de montaje taladre hoyos guía de 1/8” en estas marcas. Coloque las arandelas, incluidas, en los tornillos incluidos, y a continuación introduzca los tornillos por los hoyos de montaje dentro de los...
Need help?
Do you have a question about the UPSWM and is the answer not in the manual?
Questions and answers