Engine Oil Change - PIAGGIO Beverly Tourer 125 Manual

Hide thumbs Also See for Beverly Tourer 125:
Table of Contents

Advertisement

Engine oil change (03_04)

Have oil changed and the cartridge filter «C» replaced as indicated in the scheduled
maintenance table at an Authorised Service Centre. The engine should be emptied
by draining the oil from the drainage plug «B» of the gauze filter on the flywheel side.
In order to facilitate the oil drainage, loosen the cap/dipstick. Since a certain quantity
of oil still remains in the circuit, add approx. 800 ÷ 850 cm³ of oil through the cap
«A». Then start up the engine, leave it running for a few minutes and shut it off: after
five minutes, check the level and if necessary, top-up without exceeding the MAX.
level. The cartridge filter must be replaced at every oil change. For top-ups and
changes, use new oil of the recommended type.
03_04
WARNING
RUNNING THE ENGINE WITH INSUFFICIENT LUBRICATION OR WITH INADE-
QUATE LUBRICANTS ACCELERATES THE WEAR AND TEAR OF THE MOVING
PARTS AND CAN CAUSE IRRETRIEVABLE DAMAGE.
WARNING
EXCESSIVE OIL LEVEL AT TOP-UPS CAN LEAD TO SCALE FORMATION AND
VEHICLE MALFUNCTION.
CAUTION
USED OILS CONTAIN SUBSTANCES HARMFUL TO THE ENVIRONMENT. FOR
OIL CHANGE, CONTACT AN AUTHORISED PIAGGIO SERVICE CENTRE, AS
THEY ARE EQUIPPED TO DISPOSE OF USED OILS IN AN ENVIRONMENTALLY
FRIENDLY AND LEGAL WAY.
44

Advertisement

Table of Contents
loading

Table of Contents