GE Tec 6 Plus Operation And Maintenance Manual page 34

Tec 6 Plus Vaporizer
Step 4
Install the power cord.
4-4
Remove the power cord
retaining plate.
Fit the power cord firmly
into the socket of the
vaporizer.
Feed the power cord into
the power cord channel.
Clip the power cord
retaining plate back into
the base.
On the North American
Drager vaporizer, feed the
lead around the back of the
vaporizer and secure the
lead by means of the 'P"
clip.
POWER CORD
一
>
POWER CORD
CHANNEL
POWER CORD
RETAINING PLATE
Figure 4-4 « Installing the Datex-Ohmeda power cord
'P' CLIP POWER CORD
POWER CORD
CHANNEL
POWER CORD
RETAINING PLATE
Figure 4-5 e Installing the North American Drager power cord
1/23/01 1107-0641-000