Cover Plate - Makita DJV142 Instruction Manual

To install the blade, insert the blade (teeth facing for-
ward) into the blade holder until it latches. The blade
holder moves to the fixed position by itself and the
blade is locked. Pull the blade lightly to make sure that
the blade does not fall off during operation.
CAUTION:
• Do not open the tool opener excessively, or it
may cause tool damage.
1
► 1 . Jig saw blade
To remove the blade, push the tool opener forward as
far as it will go. This allows the blade to be released.
NOTE:
• Occasionally lubricate the roller.
Hex wrench storage
1
► 1 . Base 2. Hex wrench
When not in use, store the hex wrench as shown in the
figure to keep it from being lost.

Cover plate

► 1 . Cover plate 2. Base
Use the cover plate when cutting decorative veneers,
plastics, etc. It protects sensitive or delicate surfaces
from damage. Fit it on the back of the tool base.
Anti-splintering device
► 1 . Anti-splintering device 2. Base
For splinter-free cuts, the anti-splintering device can
be used. To install the anti-splintering device, move the
tool base all the way forward and fit it from the back
of tool base. When you use the cover plate, install the
anti-splintering device onto the cover plate.
2
CAUTION:
• The anti-splintering device cannot be used when
making bevel cuts.
9 ENGLISH
1
2
2
1