Power On Upgrade - Sharp LC-32CHE5111E Service Manual

B Upgrade Prompt
When upgrading, the TV set will light panel according to the panel parameter, and display the
progress bar. If the panel parameter of board matches the panel, you will see the following
image:
C Upgrade Flashing Status
You can judge the upgrade progress by flashing of the remote control LED light.
Upgrading
Red 1000ms Green1000ms
status after the upgrading process.
Main program upgrade succeed
Red 250ms Green 250ms
Main program upgrade Failed
Red 1750ms Green 250ms
• Notes:
• In the upgrade process, as timer software is used to control flashing, situations such as LED
light stuck when creating partition of flash, is normal phenomenon.

6.3 Power On Upgrade

A Operation Procedure
• Power Off the TV set
• Copy AllUpgrade_6308XXX.bin to the root directory of your USB memory stick
• Plug the USB device to the USB port
• Power on the TV, if the upgrade file name matches the main chipset, the LED light will
flashing and the upgrade process starting. The TV set won't auto reboot after finishing the
upgrade process, customer should pull the USB out and power off the TV set manually.
100% indicates the upgrade finished.
TV will auto reboot after user menu upgrading finished.
alternates, the TV set will turn to Upgrade succeed or Upgrade Failed
alternates, flashing before power off.
alternates, flashing before power off.
86