5G Mmwave Antenna Assembly - Samsung SM-S918B Repair Manual

5G mmWave Antenna Assembly

Leaving screws inside the device may damage internal components, such as the
battery. During assembly, be extra careful not to leave any unassembled screws
inside the device.
The 5G mmWave antenna is only supplied with United States devices.
1
Before reinstalling the upper right 5G mmWave antenna, you need to replace the
adhesive tape on the upper 5G mmWave antenna.
Remove the existing adhesive from the antenna with the tweezers or your fingers.
2
Remove the clear film from the new adhesive tape and apply it to the bottom of the
antenna with its round end furthest from the connector.
Remove the green film from the adhesive tape.
Disassembly and Assembly
93