Srhythm NC95 - Noise Cancelling Headphones Manual

What's in the Box

At a Glance

How to Use

Use ANC Function

To turn on ANC, press the ANC Button when Bluetooth is turned on; Long press the ANC Burron for 3 seconds when Bluetooth is turned off
(the LED indicator light will be green when ANC ON.)
To turn off ANC, press the ANC Button;
(the LED indicator light green color will be off when ANC OFF.)

Use Transparency Function

Press the ANC button to switch between ANC mode, Normal mode and Transparency mode.

Use Bluetooth Function

	Hold the Multi-function Button for 3-5 seconds to turn headphone Bluetooth on, then enter pairing mode.(the LED indicator light will be blue and red flashing quickly.) Start your mobile phone Bluetooth and find headphone Bluetooth pairing name "Srhythm NC95" to click it to pair.(the LED indicator light will be blue flashing slowly after paired successfully.) Hold the Multi-function Button for 3-5 seconds to turn headphone Bluetooth off. Note꞉ If NC95 is not paired with any devices within 5 minutes after Bluetooth turned on, it will automatically shut down to save power
	Adjust the volume by rotating the multifunction button clockwise or counterclockwise.
	Press the Multi-function Button to play/pause music or answer/end call.
	Previous song꞉ press three times. Next song꞉ press twice.
	Double-press the Multi-function Button to reject an incoming call
	Press the Multi-function Button 4 times to activate voice assistant.

Function
 Details

Easy Pairing

1. Hold the Multi-function Button for 3-5 seconds to turn headphone Bluetooth on, then enter pairing mode. (the LED indicator light will be blue and red flashing quickly.)
2. Keep headphone and your mobile phone as close as possible during pairing process.
3. Turn on your mobile phone Bluetooth. Search for headphone Bluetooth signal on mobile phone and click "Srhythm NC95" to pair. (the LED indicator light will be blue flashing slowly after paired successfully.)
4. If you are asked for a password/PIN code during pairing procedure, please enter "0000" (four zeros).

Pair to the Second Bluetooth Device

Step 1: Pair NC95 with First device via Bluetooth successfully and then turn off the First device's Bluetooth.
Step 2: Pair NC95 with the Second device via Bluetooth.
Step 3: Turn on Bluetooth of the first device and pair it with headphone again.
Now both of your devices are paired with NC95 for easy switching.

Active Noise Canceling (ANC) ON/OFF

To turn on ANC, press the ANC Button when Bluetooth is turned on; Long press the ANC Burron for 3 seconds when Bluetooth is turned off
(the LED indicator light will be green when ANC ON.)
To turn off ANC, press the ANC Button;
(the LED indicator light green color will be off when ANC OFF.)

Transparency Mode

Press the ANC button to switch between ANC mode, Normal mode and Transparency mode.

Wired Mode

Headphones support AUX input for wired external audio source connection. Simply turn headphone Bluetooth off and plug in the audio cable.

ANC can't be turned on in wired mode. But it works whether Bluetooth is on or off.

Buttons and Microphone can't be used in wired mode.

Voice Dialing

Press the Multi-function Button 4 times to activate voice dialing function (compatible with iPhone Siri and selected Android voice dialing software).

How to Wear

If your headphone has no sound
 or
 the
 microphone is not working

Please make sure that the headphone is connected before starting software

Airplane Adaptor Connection

Connect the Airplane Adaptor to audio socket (double holes) of aircraft seat, use 3.5mm audio cable to connect with your headphone and Airplane Adaptor.

Only use for airplane, can not be plugged into the power socket

Headphone Specification

LED Indicator Light

Pairing꞉ Blue and red lights flash alternately
Paired꞉ Blue light flashes
Playing꞉Blue light slowly flashes
Charging꞉ Red light turns on
Full Charge꞉ Red light turns off
Battery Low꞉ Red light turns on with voice prompt
ANC ON꞉ Green light turns on
ANC OFF꞉ Green light turns off
Bluetooth OFF꞉ Blue and red lights turn off

* Please kindly note that perhaps sometimes these LED indicator light color will be mixed to become other colors (pink, purple, etc.) occasionally.

Technical Specification

• Product name: Srhythm NC95
• Battery capacity: 750mAh
• Input: 5V/1A
• Chip: BES2300Y
• Charging time: About 2.5 hours
• Use time: 65 hours (Bluetooth on + ANC off)
• Bluetooth version: V5.0
• Bluetooth profile: A2DP, AVRCP, HSP, HFP
• Bluetooth range: 10-15m/33ft
• Waterproof rating: IPX4
• Net weight: 254g/0.56lb
• Impedance: 32Ω
• Driver diameter: Ф40mm
• Frequency response: 20-20KHz

Charging

Use the included Type-C 
charging
 cable 
to 
connect 
to 
headphone Charging Port. Connect the other end of charging cable to a computer USB port or USB wall charger under 6.3V voltage. Turn off headphone Bluetooth and ANC function before charging. Headphones can't be used during charging for your safety. The LED indicator light will be off or blue color when full of charge basing on headphone turn off status.
Start your mobile phone Bluetooth and find headphone Bluetooth pairing name "Srhythm NC95" to click it to pair. (the LED indicator light will be blue flashing slowly after paired successfully.)
Hold the Multi-function Button for 3-5 seconds to turn headphone Bluetooth off.

Note: Ambient temperature exceeds the charging temperature range of 32ºF (0ºC) - 113ºF (45ºC).

If there are any issues, here are tips for you:

1. Full charge your headphone with original USB-A to USB-C charging cable (*not* USB-C to USB-C cable) and 5-10W power wall charger (don't use fast charger).
2. Reset headphone by inserting audio cable into headphone audio socket then removing it. Or the upgraded NC95 headphones would be reset automatically when charging.

Delete pairing: Hold the multi-function button for 10 seconds when headphone is off. During this process, "Power on, Pairing and two beeps" can be heard sequentially.

Q&A

1. Q: Why can't headphone pair with my mobile phone?
   A: Please check if your headphone is in pairing mode or re-connection mode, check if Bluetooth search function of your Bluetooth device is turned on, if all done, then go to Bluetooth menu of your Bluetooth device, delete/ignore the headphone Bluetooth pairing name "Srhythm NC95". After that, you can try to reconnect Bluetooth according to above "Easy Pairing" steps.
2. Q: Why can't headphone turn on?
   A: Please double check the battery status of your headphone.
3. Q: Can I replace battery in the headphone?
   A: No, you can not. Headphone uses a built-in non-detachable Li-Polymer battery that can't be replaced.
4. Q: Can I use headphone while driving?
   A: For your safety, we strongly recommend that you do not use headphone while driving to avoid distraction.
5. Q: Why does headphone sometimes disconnects with Bluetooth device within 10 meters?
   A: Please check if there are any metal materials or obstacles within a relatively close range or your surroundings that perhaps interfering with Bluetooth connection. This may happen because Bluetooth is a radio technology which is sensitive to objects between headphone and other devices.
6. Q: Why can't I hear any sound from my computer or mobile phone?
   A: Please check if output channel of your computer supports A2DP profile. Also check the volume settings on your headphone and computer/mobile phone.
7. Q: Why am I unable to use headphone to control the volume of a track playing on an APP on my mobile phone?
   A: Due to configurations of different application software, headphone may not be completely compatible with some APPs.
8. Q: What do I do if Bluetooth can not close or open?
   A: Please reset Bluetooth function of headphone by inserting an audio cable into headphone audio port, then removing it. Before re-connecting, kindly remember to delete/ignore headphone Bluetooth pairing name "Srhythm NC95" on your mobile phone.
9. Q: Why does Bluetooth turn off when I connect an audio cable?
   A: This is one of our special features. When users insert an audio cable into headphone audio port, all Bluetooth feature buttons stop working and Bluetooth turns off. But, Bluetooth will be available again when audio cable is moved.
10. Q: Why does audio quality become poor on Windows PC?
    A: Some customers have mentioned poor audio quality on Windows PC. Please note that there are "Headset" and "Headphone" modes you can toggle by changing your output device. Selecting "Headphone Mode" will drastically improve the audio quality. "Headset Mode" is designed for highly compressed VOIP calls, etc. That's not the fault of headphone product, that's just the limitation of that protocol. If you are in "Headphone Mode", the audio quality is fantastic.

Safety
instructions

Hearing Safety

1. Headphones can't be used during charging for your safety.
2. DON'T use the headphones for any other purpose while driving.
3. Please use cautiously and stop using headphone in dangerous situations.
4. Please do not listen for a long time at high volume to avoid hearing damage.
5. For your safety, please do not turn the volume too high while running outside to ensure that you can hear sound in your surroundings.
6. Clean only with a dry cloth.

Operation Safety

1. Use original or certified cable for charging and voltage within 6.3V. Power will be cut off and start protection mode when the voltage exceeds 6.3V and within 36V. Headphone will be broken when the voltage is over 36V.
2. Keep away from children to avoid danger from improper use.
3. Headphones can't be charged or turned on in in the extreme temperature. Please use headphone within the operating temperature range: 32ºF (0ºC) - 113ºF (45ºC).
4. Do not submerge headphone in water.
5. Do not use corrosive cleaner/oil to clean headphone.
6. Turn off the headphone's Bluetooth and ANC function to save power when you do not use headphone.