Srhythm S1 - Wireless Stereo Earbuds Soulmate Series Manual

What's in the Box

Safety Instructions

Hearing Safety

1. To avoid hearing damage, please do not listen for a long time at high volume.
2. Please use cautiously or stop using the earbuds in potentially dangerous situations.
3. Do not use the earbuds while driving.
4. For your safety, please do not turn the volume too high while running outdoors so as to ensure that you can hear sounds in your surroundings.

Operation Safety

1. Avoid dropping.
2. Do not disassemble.
3. Keep away from children to avoid danger from improper use.
4. Do not submerge in water.
5. Do not use outdoors during thunderstorms.
6. Avoid operating in extreme temperatures. Please use the earbuds within their operation temperature range: -15°C (5 F) – 55°C (131 F).
7. Use original or certified cables for charging.
8. Do not use corrosive cleaner/oil to clean the earbuds.

Parameters

True wireless stereo, Hi-Fi sound quality and dual-mode Bluetooth; both earbuds have Bluetooth function and can be used alone or in pairs.

Pair two earbuds

1. Connect the earbuds to each other: Take out two earbuds; after 1–3 seconds, you will hear a sound and the lights will flash blue on both sides when paired.
2. Connect the earbuds to your device: Select "S1" on your device and connect. The lights will turn off when connected.

Pair one earbud

1. Take out one earbud; the earbud will turn on automatically and the light will flash red and blue alternately.
2. Select "S1" on your device and connect. The light will turn off when connected.

Automatic Pairing

After the earbuds are paired with your device, they will be automatically paired next time thanks to the Bluetooth chip in the earbuds. To connect to other devices, you need to turn off the Bluetooth of the original device or cancel the connection.

Q&A

1. Why can't the earbuds connect to each other successfully?
   Solution: Turn off the Bluetooth of your device and double-click the right earbud to pair the two earbuds.
2. Why do I only hear the sound on one side, the other side does not flash or the light flashes red and blue alternately?
   Solution: Turn off the Bluetooth of your device, put the earbuds back in the charging case, then take out the two earbuds to reset.

Multi-function Touch Button

	Play/Pause Music: Double Tap on L/R earbud.
	Play Previous Song: Tap 3 times on left earbud.
	Play Next Song: Tap 3 times on right earbud.
	Activate Siri: Long press on L/R earbud for 2 seconds.
	Answer/Hang up Call: Double Tap on L/R earbud.
	Reject Call: Long press on L/R earbud for 2 seconds.

Indicator Light

Pairing: Light flashes red and blue alternately

Paired to Each Earbud: Blue light flashes

Paired to Device: Blue light turns off

Charging: Red light turns on

Fully Charged: Blue light turns on

Turn Off Earbuds

Long press the multi-function touch button for 5 seconds until the red light turns on, or put the earbuds directly into the charging case. Please note: If the earbuds are far from the device or the Bluetooth of the device is turned off, the earbuds will automatically turn off in 5 minutes. You don't need to worry that the earbud batteries will run out of power.

Charging Earbuds

Put the earbuds into the charging case to charge. When charging, the red light will turn on, and when fully charged, the indicator light will turn blue. The number on the LED display shows the percentage of power remaining in the charging case.

The 4 indicator lights from bottom to top represent 25%, 50%, 75% and 100% of earbud battery power.

After the earbuds have been in the charging case for about 30 seconds, the LED display will turn off. Please note that the earbuds will turn off while charging.

Charging the Charging Case

Plug the provided USB charging cable into the slot on the bottom of the charging case.

The LED display will show the battery power of the charging case, and the green signal digit will flash. When fully charged, it will show "100".

PLEASE NOTE: