IKEA VALLHORN Manual page 4

Get to know your product
Pairing button
Choose how many minutes the connected lights and plugs will be on.
Choose between light and dark mode. In light mode, the detected motion will
turn on lights in any surrounding. In the dark mode, the detected motion will
turn on the lights only in the dark surrounding.
Changing the batteries
A red LED light will light up under the lens of the motion sensor to show that new
batteries are needed. Open the battery lid and replace with two new AAA/HR03
batteries. We recommend using LADDA rechargeable batteries. Please note they
are sold separately.
Factory reset
To reset and remove all connected products, quick-press the Pairing button 4
times (within 5 seconds). Follow steps 1-3 to reconnect your smart products.
Care instructions
To clean the product, wipe it with a soft dry cloth. Do not use abrasive cleaning
agents, chemical solvents or other equipment that may damage the products.
4