M.T.H. HO 4-8-8-4 Big Boy Engineer's Manual page 3

QUICK START GUIDE
Of course, you should read your manual over before running your steam engine.
But if you just can't wait, choose how you want to run below and enjoy! It is
important to pay attention to which model you have purchased and to make sure
you are following the proper instructions for your Engine.
I USE A REGULAR DC SUPPLY...
Step 1: Unpack your engine
Step 2: Set the engine on the track
Step 3: Apply increasing DC voltage until she starts up and pulls out!
I'M A DCC OPERATOR...
Step 1: Unpack your engine
Step 2: Set the engine on the track
Step 3: Power up your DCC system
Step 4: Select engine address 3 and press "F3" to start her up
Step 5: Turn the throttle and head on down the pike
I RUN DCS....
Step 1: Unpack your engine
Step 2: Set the engine on the track
Step 3: Power up your DCS system
Step 4: Add the engine to your system and start her up
Step 5: Turn the throttle and move out
CAUTION: M.T.H. HO engines DO NOT OPERATE ON AC VOLTAGE.
Applying AC power to your locomotive could cause permanent damage and will
void your warranty.
M.T.H. HO 4-8-8-4 Big Boy Steam Engine
3