Table of Contents
Advertisement
10 Connect the Male block
connector of the ON/
OFF switch to the Female
block connector on the
harness.
11 Position excess harness
cable into the top of the
mainframe as shown.
12 Secure Front cover
assembly to the carriage
using 2 m4x10 Pozi screws
(902101).
13 Place new seat onto
carriage and connect the
seat harness to the
carriage harness as shown.
14 Complete Seat and carriage with upgrade.
ACORN 80 Maintenance & Service Manual
ON / OFF MALE
BLOCK CONNECTOR
TO FEMALE
APPENDIX 10
Rationalisation Procedures
EXCESS WIRING IN
TOP OF MAINFRAME
87
Advertisement
Table of Contents
