Table of Contents
Advertisement
Connecting to the Network
After sucessfully entering your PIN code, your CMD-C1 searches for an
available GSM network. The network search is automatic, but may take a
few seconds (see also "Menu Operations, Control").
You are ready to make and receive calls when the
Network Operator's name appears on the display.
The following indicates the strength of the received network signal. If the
signal is very weak, there is a risk of losing service.
,
No service
Strong signal
Weak signal
If you cannot obtain Service
One reason for failure to obtain network service is that the reception
strength may be too weak. Try moving to a higher elevation, to a window
or open space. Make certain that there is nothing obstructing the antenna
area at the upper rear of your CMD-C1.
Roaming
If you are out of range of your "Home" Network Operator, especially
when abroad, another Network Operator may be selected automatically,
subject to signal strength and roaming agreements between Network
Operators. Contact your Network Operator/Service Provider for details.
GB
11
Advertisement
Table of Contents
