Technics RS-B465 Service Manual page 6

RS-B465
Procedure
2. Remove the 1 connector (CP1).
3. Remove the 3 flat cables (CN3, CN4, CN7).
y Front Panel
4. Remove the front panel in the direction of the
arrow.
| Procedure
1-3-4
Knobs
1. Pull out the 3 knobs.
2. Remove the 1 nut.
. Remove the 6 screws (@~@).
. Release the 2 claws.
Remove the FL drive P.C.B. in the direction of the
arrow.
OR w
Removal of the rec level P.C.B. and
mic jack P.C.B.
Ref. No.
6 Removal of the operation P.C.B.
Procedure
1-345
Mic Jack PC.B.
i Removal of the rec level P.C.B.
* Remove the rec level P.C.B. in the direction of the
arrow.
i Removal of the mic jack P.C.B.
¢ Remove the mic jack P.C.B. in the direction of the
arrow.
Procedure
1--3-—--4—6
1. Remove the 4 screws (@~®).
2. Release the 4 claws.