Bosch UniversalDistance 40C Instructions Manual page 23

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 22
Do not direct the laser beam at persons or an-
imals and do not stare into the direct or reflec-
ted laser beam yourself. You could blind some-
body, cause accidents or damage your eyes.
If laser radiation hits your eye, you must close your eyes
u
and immediately turn your head away from the beam.
Do not make any modifications to the laser equipment.
u
Have the measuring tool serviced only by a qualified
u
specialist using only original replacement parts. This will
ensure that the safety of the measuring tool is maintained.
Do not let children use the laser measuring tool unsu-
u
pervised. They could unintentionally blind themselves or
other persons.
Do not use the measuring tool in explosive atmospheres
u
which contain flammable liquids, gases or dust. Sparks
may be produced inside the measuring tool, which can ig-
nite dust or fumes.
The measuring tool is equipped with a wireless inter-
u
face. Local operating restrictions, e.g. in aeroplanes or
hospitals, must be observed.
The Bluetooth® word mark and logos are registered trade-
marks owned by Bluetooth SIG, Inc. and any use of such
marks by Robert Bosch Power Tools GmbH is under li-
cense.
Caution! When using the measuring tool with
u
Bluetooth®, a fault may occur in other devices and sys-
tems, aeroplanes and medical devices (e.g. pace-
makers, hearing aids). Also, damage to people and an-
imals in the immediate vicinity cannot be completely ex-
cluded. Do not use the measuring tool with Bluetooth® in
the vicinity of medical devices, petrol stations, chemical
plants, areas with a potentially explosive atmosphere
and in blasting areas. Do not use the measuring tool
Bosch Power Tools
English | 23
1 609 92A 85R | (17.04.2023)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Universaldistance 50c

Table of Contents