Table of Contents
Advertisement
4.2.7
Rollomatic E Mini Light
Special version of Rollomatic E Mini
consisting of three hollowed-out
steel plates which are welded
together. The cavities are filled with
fiberglass-reinforced polyamide in
an injection molding process.
Compared to conventional bars, the
Rollomatic E Mini Light weighs up to
25% less and offers good strength.
Applications
General purpose cutting on electric
saws, gasoline saws and pole
pruners up to 1.5 kW.
Chain and Bar Manual
4.2.8
Rollomatic ES
Like the Duromatic, the blade of the
Rollomatic ES is made of tough,
wear-resistant steel in a special
laser cutting process. The nose
sprocket is accommodated in a
separate bar nose which is riveted
to the bar body. Rollomatic ES bars
combine the high strength and
robustness of the Duromatic with
the lower nose wear (rolling friction
instead of sliding friction) of the
Rollomatic bar. The bar nose is
replaced in the case of nose
sprocket wear.
Applications:
For very demanding professional
felling and bucking operations on
high powered saws.
4.2.9
Rollomatic ES Light
Made in Germany
Like the Duromatic bar, the blade of
the Rollomatic ES Light is made of
tough, wear-resistant steel in a
special laser cutting process.
Large cavities and longitudinal ribs
in the bar body make it up to 30%
lighter than the Rollomatic E Super.
The cavities are sealed with a cover
plate in a special laser welding
process. This ensure good strength
and improved balance.
Applications
Professional usage in forestry,
agriculture and construction
industry.
41
Advertisement
Table of Contents
