Tricity Bendix TM 540 Operating And Installation Instructions page 6

Table of Contents

Advertisement

4.5
46
Should the clothes become dry before the cycle has finished, or if an excessive
programme time has been selected, the sensordry thermostat will automatically
switch off the heater to prevent overdrying and save energy, although the drum
will still rotate. The heater may switch on again for short periods at a later stage.
There is an automatic 12 minute cool down period at the end of every cycle,
during which the heater is switched off. This helps to minimise creasing.
When drying large items such as sheets, we suggest you periodically stop the
dryer to redistribute the load.
To stop the machine during the middle of the programme simply open the door;
the drum will stop rotating automatically and restart when you close the door.
To lengthen or shorten a timed programme, turn the programme selector.
After removing the dried clothes clean the filter as follows:
Pull the filter upwards and away from the appliance.
Remove any thread or fluff by hand or with a soft brush.
Slide the filter back.
Wash the filter occasionally in detergent solution and with a soft brush remove
small particles.
:
Disconnect from the electricity supply.
Care labels you may find on your fabrics
(
poze
'Do not tumble dry'
'Tumble drying beneficial'

Advertisement

Table of Contents
loading

Table of Contents